Skip to main content

Fix Your Stuff

Right to Repair


Editing Step 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 16 guides that include this step.

Step Type:

Drag to rearrange

Peeling up yellow tape as necessary, remove the following 8 screws:

One 4.5 mm Phillips on the right side of the heat sink.

Three 6 mm Phillips near the display.

Two large 7.5 mm Phillips with springs (don't forget to remove the springs). If the springs are not releasing, needle nose pliers can help get this done.

Two 13 mm screws from the left side of the heat sink and the right side of the fan.

Your contributions are licensed under the open source Creative Commons license.