Skip to main content
Help
Editing Step 23 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 8 guides that include this step.

Step Type:

Drag to rearrange

Verify that your iMac is turned off and unplugged from power before you continue.

After confirming that your iMac functions properly, disconnect the display cables and carefully lean the display forward.

Remove the film from the two bottom strips by reaching in from above with a pair of tweezers and pulling the blue tabs straight up from the bottom edge of the display.

Your contributions are licensed under the open source Creative Commons license.