Skip to main content
Editing Step 12 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 8 guides that include this step.

Step Type:

Drag to rearrange

The next few steps will show you how to install the bottom right adhesive strip (strip 4R), which includes a notch that must be aligned with the microphone.

Read through this step and the next four steps before you attempt the procedure.

Grasp the red pull tab on strip 4R and pull to separate about 2 inches (5 cm) of white backing from the strip.

Your contributions are licensed under the open source Creative Commons license.