Skip to main content
Help
Editing Step 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 48 guides that include this step.

Step Type:

Drag to rearrange

Flip up the retaining flap on the LCD ribbon cable ZIF connector.

Using your fingers or a pair of tweezers, pull the LCD ribbon cable from its socket on the logic board.

You may have to force restart the iPad by holding down the power button and home button for at least ten seconds until you see the Apple logo if the LCD screen doesn't power on after connecting the ZIF connector for the LCD screen when putting everything back together.

Your contributions are licensed under the open source Creative Commons license.