Skip to main content
Editing Step 7 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 14 guides that include this step.

Step Type:

Drag to rearrange

Remove the following screws from the headphone jack assembly:

Five 2.6 mm Phillips #0

Two 2.2 mm Wide Head Phillips #00

Two 2.6 mm Phillips #00

These screws are angled into the aluminum frame. Be sure to hold the screwdriver so that the screwdriver is in line with the screw, to avoid stripping the screw.

Your contributions are licensed under the open source Creative Commons license.