Help

Editing Step 8 — Add a title

Notice: You are editing a prerequisite guide. Any changes you make will affect all 20 guides that include this step.

Step Type:

Drag to rearrange

Remove the 2.8 mm Phillips screw securing the optical drive.

The Bluetooth cable may be covering the screw; carefully push it aside before removing the screw.

Do not over-tighten this screw when re-mounting. You could break the plastic enclosure.

After removing the screw, push the metal tab backwards, towards the fan, to release the front of the optical drive.

Your contributions are licensed under the open source Creative Commons license.