Skip to main content

Fix Your Stuff

Right to Repair


Editing Step 16 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Insert a spudger under the GPS connector end of the upper component board and lift it up off of its adhesive.

Be very careful not to scrape the board against the top of the rear case.

The GPS antenna cable will slide out of its ZIF socket when you do this. On reassembly, fit the cable back into the socket as you replace the upper component board.

Your contributions are licensed under the open source Creative Commons license.