Skip to main content

Fix Your Stuff

Right to Repair

Store

Help
Editing Step 3 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 25 guides that include this step.

Step Type:

Drag to rearrange

Remove the two 7.2 mm T10 Torx screws securing the power supply to the rear enclosure.

In newer model iMacs these are 7.2 mm T8 Torx screws.

When reassembling - make sure you have positioned the power button wire so it is not trapped below the board.

Your contributions are licensed under the open source Creative Commons license.