Skip to main content
Editing Step 2 —

Step Type:

Drag to rearrange

Once you have confirmed that the camshaft position sensor is at fault and received the replacement part, it's time to get your hands dirty.

The second photo shows the location of various components.

First, remove the plastic engine cover. Using a flat-head screwdriver (or a coin), turn each of the three plastic screws 90° (1/4 turn) counterclockwise until they pop up. Lift the cover.

When reinstalling the engine cover, do not turn the screws clockwise, but simply push them down until they click in place.

Your contributions are licensed under the open source Creative Commons license.