Skip to main content
Help
Editing Step 10 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

Insert the tip of a spudger under each of the antenna cables near their connectors and pry up to disconnect them from the AirPort board.

The three cables are coded with black sleeves of different lengths. During reassembly:

Connect the long-sleeved cable to the center socket.

The short-sleeved cable connects next to the screw.

The remaining cable has no sleeve, and connects in the last empty socket, next to the fan.

When reconnecting the antenna cables, run them over the camera cable, not underneath.

Your contributions are licensed under the open source Creative Commons license.