Skip to main content
Help
Editing Step 4 —

Step Type:

Drag to rearrange

After replacing the new bulb, follow the reverse order of disassembly. Before you fix the metal frame, align your headlamp beam.

To do so, locate the screws on the headlamp cover body, which are covered with a plastic frame. The outer-side screw aligns the fog lamp and the inner-side screw aligns the headlamp. Start your car, turn on the fog lamps, and align them; then, turn off the fog lamps and align the headlamps.

It's essential to have a 20m distance ahead to adjust the light beams. Keep your car running so that it will not drain your battery if the engine is not functioning.

Your contributions are licensed under the open source Creative Commons license.