Use a flat pry tool (such as a flat-blade screwdriver) to prop up an edge of the subwoofer.
In my case, I just used the Phillips #2 screwdriver I had on-hand.
Slide your fingers underneath the sub so that you get a good grip on its edge.
Carefully lift the subwoofer out of the enclosure, minding any wires that may be tethering the sub to the enclosure.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.