Skip to main content

Fix Your Stuff

Right to Repair


Editing Step 5 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Remove the following 12 T8 Torx screws from the logic board:

Four 3.9 mm, three along the front edge of the logic board, and one just above the right fan connector.

Three 6.9 mm large-headed screws in the upper, left corner of the logic board.

Five 6.9 mm scattered on the right half of the logic board.

Your contributions are licensed under the open source Creative Commons license.