Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Help
Editing Step 6 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Use a spudger to gently (very gently) pry up the left side of the logic board.

If the logic board does not immediately come free, it may be necessary to soften the thermal paste between the logic board and heat sink. You can soften the thermal compound using a hairdryer. Move the hairdryer back and forth between the two fans about one inch above the logic board for one minute. At this point, logic board should now come free easily.

Your contributions are licensed under the open source Creative Commons license.