Skip to main content
Help
Editing Step 1 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

Step Type:

Drag to rearrange

The battery door has been removed for clarity, but is not necessary. See this guide for how to remove it.

Unscrew the eight Phillips #00 screws on the back panel:

Two 2.5x6mm screws above the screen.

One 3x6mm screw on the upper part of each side (two total; right side shown).

One 3x7.5mm screw on the lower part of each side (two total).

Two 3x4.5mm screws on the bottom.

Your contributions are licensed under the open source Creative Commons license.