Skip to main content
Help
Editing Step 16 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

Step Type:

Drag to rearrange

Use the flat end of a spudger to disconnect the headphone jack connector from the logic board.

Pry up only on the connector—not on the socket itself.

Newer iPad units have a loop of tape connecting this connector to its socket on the the logic board. This tape must be cut in order to disconnect the headphone jack.

Fold the headphone jack cable out of the way.

Your contributions are licensed under the open source Creative Commons license.