Skip to main content
Help
Editing Step 4 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 28 guides that include this step.

Step Type:

Drag to rearrange

Remove the single 2.3 mm Phillips screw securing the battery connector to the logic board.

To reduce the risk of a short, you can insert a battery blocker or a modified opening pick to disconnect the battery.

Be very careful when you isolate the battery using a battery blocker. The battery contacts are easily damaged, resulting in irreversible damage.

Slide the battery blocker underneath the battery connector area of the logic board, and leave it in place while you work.

If you are having trouble fitting the battery blocker underneath the logic board, you can try using a playing card to disconnect the battery.

Your contributions are licensed under the open source Creative Commons license.