Skip to main content
Help
Editing Step 1 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 14 guides that include this step.

Step Type:

Drag to rearrange

Power off and unplug your laptop before you begin.

Turn the laptop upside-down and remove the following screws using a Phillips #0 driver:

Two 9.5 mm screws in the middle of the back edge, and one 9.5 mm screw in the right edge

Two 4.3 mm screws in the back corners

One 17.5 mm screw at the left edge near the optical drive

Three 4.3 mm screws in the front edge

Your contributions are licensed under the open source Creative Commons license.