Help
Editing Step 6 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 21 guides that include this step.

Step Type:

Drag to rearrange

Remove the following 10 screws from the bottom case:

Three 1.7 mm Phillips from the front edge of the battery compartment.

One 3.9 mm T8 Torx to the right of the memory card.

One 6.9 mm T8 Torx at the left edge of the memory compartment.

Three 12.4 mm fully threaded Phillips from the center of the row of screws along the back edge of the case.

Two 15.1 mm 2.5 mm threaded Phillips, one from either end of the row of screws along the back edge of the case.

Your contributions are licensed under the open source Creative Commons license.