Skip to main content

Fix Your Stuff

Right to Repair


Editing Step 17 —

Step Type:

Drag to rearrange

LEDs are polarized: one side of the diode is positive, the other is negative. It is typical convention for an LED to be manufactured with its positive lead longer than the negative lead.

Positive lead (longer)

Negative lead (shorter)

Insert the LED into the PCB as illustrated. Be sure to match up the positive lead of the LED (the longer one) with the positive pad on the PCB (marked with a "+").

Bend one of the leads down tightly. This serves as a securement so the part doesn't fall away while you solder.

Your contributions are licensed under the open source Creative Commons license.