Skip to main content
Editing Step 8 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 14 guides that include this step.

Step Type:

Drag to rearrange

Remove the following six screws securing the logic board to to the upper case:

One 3.1 mm T5 Torx screw

One 2.5 mm T5 Torx screw

One 5.5 mm silver, raised-head T5 Torx screw

Two 5.7 mm T5 Torx screws

One 3.8 mm silver T5 Torx screw

Your contributions are licensed under the open source Creative Commons license.