Skip to main content
Help
Editing Step 10 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Use the pointed end of a spudger to gently fold the power/sleep button bracket down from the top of the rear case.

Use tweezers to grab and remove the button.

For reassembly, note the orientation—the metal bar should be flush with the bottom of the button.

If you can't get a hold on the power button from inside the case, use a spudger to slightly push it in from the outside.

Your contributions are licensed under the open source Creative Commons license.