Skip to main content
Help
Editing Step 12 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 17 guides that include this step.

Step Type:

Drag to rearrange

Remove the following Phillips #000 screws securing the front panel assembly cable bracket to the logic board:

Two 1.3 mm screws

One 1.7 mm screw

One 3.25 mm screw

It is especially important to keep track of your screws in this step for reassembly. Accidentally using the 3.25 mm screw or the 1.7 mm screw in the bottom right hole will result in significant damage to the logic board causing the phone to no longer boot properly.

Be careful not to over-tighten the screws. If they don't fit easily when you are securing them, they may be the wrong size—don't force them.

Your contributions are licensed under the open source Creative Commons license.