Skip to main content
Editing Step 3 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

Step Type:

Drag to rearrange

Carefully separate the two sides of the casing by pulling each side apart as if opening a book. Do not be alarmed if the rubber volume control button falls out of the casing.

Lay the sides of the phone so they are open side up.

On the side of the phone with the logic board, locate the screw as indicated.

Use the T-6 screwdriver to remove the screw from this part of the board.

Note: Take special care not to lose the white washer that seperates the screw from the logic board.

Your contributions are licensed under the open source Creative Commons license.