Skip to main content
Editing Step 8 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 3 guides that include this step.

Step Type:

Drag to rearrange

When removing the coil, make sure it stays wound up. It could very easily pop out, and you would have to wind it all the way back up and try to squeeze it back into the slot when you reassemble the dryer.

To remove the coil, use your screw driver to pop the coil out of the slot.

This is what the coil would look like if it came undone when you removed it.

Your contributions are licensed under the open source Creative Commons license.