Skip to main content
Help
Editing Step 9 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

Step Type:

Drag to rearrange

Lift and remove the battery from the iPhone.

There should be no resistance. If the battery remains stuck, reheat the iOpener and pry again.

If your replacement battery came in a plastic sleeve, remove it before installation by pulling it away from the the ribbon cable.

If your new battery doesn’t have adhesive preinstalled, refer to this guide to replace the adhesive strips.

Perform a hard reset after reassembly. This can prevent several issues and simplify troubleshooting.

Your contributions are licensed under the open source Creative Commons license.