Skip to main content
Help

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

Step Type:

Drag to rearrange

Follow our iOpener heating instructions or use a hair dryer to heat the adhesive securing your battery to the rear case.

Lay the iOpener flat on the backside of the iPhone to the right of the camera. Smooth it out so that there is good contact between the back of the iPhone and the iOpener.

Let the bag sit on the iPhone for approximately 90 seconds before attempting to remove the battery.

If using a hair dryer or heat gun, heat the back of the iPhone until it's slightly too hot to touch.

Do not apply heat directly to the battery.

Your contributions are licensed under the open source Creative Commons license.