Skip to main content
Help
Editing Step 1 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 16 guides that include this step.

Step Type:

Drag to rearrange

Remove the following five screws:

One 3 mm Phillips near the screen latch (mind the big magnet on the screen latch).

Two 3.5 mm Phillips attaching the EMI fingers to the metal framework.

One 10 mm Phillips near the optical drive.

One 14 mm long 4 mm standoff in the upper left corner. You can remove this standoff either with a 4 mm nut driver or needlenose pliers.

Lift the EMI fingers above the battery connector away from the metal framework.

Your contributions are licensed under the open source Creative Commons license.