Skip to main content
Editing Step 6 —

Step Type:

Drag to rearrange

The flex cable running up the right side of the battery is connected to a smaller board, which is held to an EMI shield on the logic board with a small amount of adhesive; it can be carefully pried up.

The same thing can be done to the other side. Peel up the tape holding the flex cables down remembering where they went.

Pay attention to the side tab on the left flex cable. This piece can be peeled up the same way. Do not be afraid to bend it a little (BEND DO NOT BREAK).

Your contributions are licensed under the open source Creative Commons license.