Skip to main content
Editing Step 7 —

Step Type:

Drag to rearrange

Align the patch with the baffle, exactly as you want it to appear when you are done.

Slide the garment into the sewing machine, repositioning the patch if necessary.

To prevent the insulation from leaking through the stitches, fir your sewing machine with the smallest needle available.

Sink the needle to hold the patch into place.

Do not pin the patch, as this will create unnecessary holes where down can escape.

Holding the patch in place sew directly over the edge of your patch.

Your contributions are licensed under the open source Creative Commons license.