Skip to main content
Help
Editing Step 20 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 6 guides that include this step.

Step Type:

Drag to rearrange

Lift the logic board enough to gain clearance and use a spudger to pry the microphone up off the upper case.

Slide the logic board away from the port openings and lift the assembly out of the upper case.

Before reinstalling the logic board, it is easiest to press the microphone down into its housing in the left speaker to keep it in place.

Your contributions are licensed under the open source Creative Commons license.