Skip to main content
Help
Editing Step 18 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 6 guides that include this step.

Step Type:

Drag to rearrange

Remove the following screws:

Seven 3.3 mm T6 Torx screws securing the logic board to the upper case.

Two 8 mm T6 Torx screws securing the DC-In board to the upper case.

Do not remove the logic board yet! There are components on the underside of the logic board attached to the the upper case that must first be disconnected.

Your contributions are licensed under the open source Creative Commons license.