Help

Editing Step 4 — Add a title

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

This step is only required if you have an anti-glare display. If you have a glossy display, skip to step 12.

Disconnect the Bluetooth cable by pulling the male end straight away from its socket.

Pull the connector parallel to the face of the logic board, not straight up.

Use the flat end of a spudger to pry the Bluetooth antenna cable up from its socket on the board.

Your contributions are licensed under the open source Creative Commons license.