Skip to main content
Editing Step 13 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 42 guides that include this step.

Step Type:

Drag to rearrange

Continue with the left side of the LCD: insert the flat end of the spudger between the LCD and shield plate and insert the spudger as far as it will go.

At this point the LCD should be loosened from the adhesive holding it. If it is not, re-insert the spudger on the right side or top to fully free the LCD.

Your contributions are licensed under the open source Creative Commons license.