Skip to main content
Editing Step 10 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 42 guides that include this step.

Step Type:

Drag to rearrange

In the next few steps, you'll be sliding a spudger between the LCD and the metal backing plate to fully separate the LCD from the adhesive beneath.

Insert the flat end of a spudger between the LCD frame and the metal backing plate.

Be sure to get the spudger between the LCD frame and backing plate, and not beneath the plate. Prying up on the plate will damage it, because it is screwed down to the rear case beneath the LCD.

Your contributions are licensed under the open source Creative Commons license.