Fix Your Stuff Community Store
Help

Expansion Bay Prereq

Editing Step 2 —
Loosen the interposer screws

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 4 guides that include this step.

Step Type:

Drag to rearrange

If you have the graphics module installed, your interposer will have four screws. Otherwise, you'll have three screws.

Lift the pull tab on the interposer and let it rest vertically to access all of its screws.

Use a T5 Torx screwdriver to loosen the three captive screws securing the interposer.

If you have the graphics module, use a T5 Torx screwdriver to loosen the four captive screws securing the interposer.

Your contributions are licensed under the open source Creative Commons license.