Skip to main content
Help

Steam Deck OLED Left Button Board Replacement

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 9 guides that include this step.

Step Type:

Drag to rearrange

If you aren't replacing your button board, you can leave this cable connected and lay the board over the right side of the frame after you've removed the screws.

Be careful when disconnecting the haptics, as the cables and connector are very delicate. Pry only on the base of the white connector and not on the cables or socket.

Insert the point of your spudger under the neck of the haptics cable connector.

Gently pry up to disconnect it.

Your contributions are licensed under the open source Creative Commons license.