Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Help
Editing Step 3 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 15 guides that include this step.

Step Type:

Drag to rearrange

Use a pair of tweezers to pull the vertical sync ribbon cable out of its socket on the LED driver board near the top left corner of your iMac.

On some iMacs this may not be a ribbon cable but four separate, very fine and very fragile wires. Be very careful, if the tweezers slip off the plug, you will very likely pull a wire out of the assembly.

Your contributions are licensed under the open source Creative Commons license.