Fix Your Stuff Community Store
Help

HTC Vive XR Elite Lens Assembly Replacement

Editing Step 7 —
Disconnect the lens assembly cables

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 11 guides that include this step.

Step Type:

Drag to rearrange

Use the flat end of a spudger to pry up and disconnect the lens assembly cable connector.

Repeat this procedure for the other connector.

To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Don't press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.

Your contributions are licensed under the open source Creative Commons license.