Fix Your Stuff Community Store
Help

Google Pixel 7a Wireless Charging Assembly Replacement

Editing Step 4 —
Remove the old copper tape

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 13 guides that include this step.

Step Type:

Drag to rearrange

Be careful not to damage the battery with your tool during this step.

Apply a heated iOpener to the underside of the flash for one minute.

Hold the neck of the flash cable steady and use tweezers to peel and remove the copper tape from the flash unit.

If the copper tape stayed on the logic board cover and you have a replacement, remove the old tape now.

Your contributions are licensed under the open source Creative Commons license.