Fix Your Stuff Community Store
Help

Google Pixel 7a Wireless Charging Assembly Replacement

Editing Step 5 —
Unfasten the logic board cover

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 13 guides that include this step.

Step Type:

Drag to rearrange

While the Pixel 7a uses Torx Plus screws, standard Torx drivers may still work. If your kit came with standard Torx bits, use the T2 bit to remove 1IP Torx Plus screws, and the T3 Torx bit to remove 3IP Torx Plus screws. Make sure to apply constant, downward force to prevent stripping.

Use a 3IP Torx Plus driver to remove the thirteen 4.3 mm screws securing the logic board cover.

Use a 1IP Torx Plus driver to remove the 1.5 mm screw securing the right edge of the cover.

Your contributions are licensed under the open source Creative Commons license.