Fix Your Stuff Community Store
Help

MacBook Pro 14" Early 2023 Logic Board Removal

Editing Step 26 —
Disconnect the Touch ID sensor

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 8 guides that include this step.

Step Type:

Drag to rearrange

Use a spudger to pry up and disconnect the Touch ID sensor's press connector near the top left of the device.

The Touch ID sensor cable is adhered to the frame. If the adhesive doesn't separate when you disconnect the press connector, slide an opening pick under the cable to separate it.

Your contributions are licensed under the open source Creative Commons license.