Skip to main content

Fix Your Stuff

Right to Repair

Store

Help
Editing Step 1 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

Step Type:

Drag to rearrange

Use a spudger to loosen the right speaker cable's connector from its socket on the logic board.

It is useful to push downward on both short sides of the connector to "walk" it out of its socket. Be careful with the corners of the connectors, they can be easily broken off.

Pull the connector downwards to remove it from its socket.

Your contributions are licensed under the open source Creative Commons license.