Skip to main content
Help
Editing Step 18 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 16 guides that include this step.

Step Type:

Drag to rearrange

With both plastic cards inserted as shown near the corners, gently twist the cards sideways to increase the gap between display and case.

If there are any sections that seem to stick and won't separate, stop twisting and use one of the cards to cut the remaining adhesive.

Begin to lift the top of the display up from the frame.

Only lift the display a few inches—the display data and power cables are still connected to the logic board.

Your contributions are licensed under the open source Creative Commons license.