Skip to main content

Fix Your Stuff

Right to Repair


Editing Step 4 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 16 guides that include this step.

Step Type:

Drag to rearrange

Remove the following screws from the front of the logic board:

Two 23.7 mm T10 screws

Four 7.4 mm T10 screws

One 20.8 mm T25 spacer screw

One captive T10 screw

This screw is beneath a hole in the logic board. You'll need a fixed screwdriver or the 60 mm extension from an iFixit driver kit to reach it.

Your contributions are licensed under the open source Creative Commons license.