Help
Editing Step 22 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 43 guides that include this step.

Step Type:

Drag to rearrange

Be very careful handling the display—it's big, heavy, and made of glass. The display has fragile edges. Avoid lifting the display by the corners.

Lift the display up from the frame and remove it from the iMac. Lay the display face down on a flat, soft surface.

It may be necessary to slowly lift from one side, to peel against the remaining adhesive.

After the adhesive is cut, it cannot be used to re-seal the display in place. Follow this guide when your repair is complete to replace the adhesive strips that secure the display to the rear enclosure.

Your contributions are licensed under the open source Creative Commons license.