Skip to main content
Help
Editing Step 20 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 43 guides that include this step.

Step Type:

Drag to rearrange

Lift the display up to a near-vertical position.

At this point there is still a strip of adhesive along the bottom of the display, that will hold the display to the frame like a hinge. You can loosen this adhesive by working the display up and down a few times.

Remove as much of the adhesive as possible by grabbing it at the outer edges, and then pulling or rolling it towards the middle.

Your contributions are licensed under the open source Creative Commons license.