Skip to main content
Help
Editing Step 10 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

The two remaining strips (14 and 15) do not have guide holes and are more difficult to place than the previous ones. Before sticking them down, we recommend first setting them in their respective places on the iMac to get comfortable with their placement.

Grasp the red film pull tab on the 14 adhesive strip and pull to remove the backing from the strip.

Align the strip on the bottom edge of the rear enclosure, directly to the right of the middle screw on that edge.

Run your finger along the length of the adhesive strip to ensure it is straight and unwrinkled, pressing down as you go to adhere the strip to the iMac.

Your contributions are licensed under the open source Creative Commons license.