Skip to main content

Fix Your Stuff

Right to Repair


Editing Step 1 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

At this point, your optical drive assembly should be separated from your GameCube (picture 1).

Flip the optical drive assembly upside down

Shown in picture 2, remove the 6 Phillips #1 screws with a philips screwdriver.

Once the screws are removed, gently lift and remove the metal plate (shown in picture 3).

Be careful not to disturb the brown ribbon cable (highlighted in the yellow).

Your contributions are licensed under the open source Creative Commons license.