Skip to main content
Help
Editing Step 4 —

Step Type:

Drag to rearrange

The next three steps show how to test the high pressure sensor. You should check this sensor if you get a C6 or C6H error.

If you don't have a "duo" Instant Pot, you will only have one pressure sensor, and it's this high pressure one.

Use pliers or your fingers to lift and disconnect one of the sensor's spade connectors from the circuit board.

These connectors can be stubborn. Gently wiggle the connector as you pull to loosen it.

This disconnects the sensor electrically, so we can do a continuity test.

Your contributions are licensed under the open source Creative Commons license.